Makro Detector JeoScan 2D system Manual do Utilizador

9 USING THE LCD MODE NOTE: The LCD system function of the device can only be used when 360x440mm search coil and 600x1000mm search coil is inst

10 Checking Battery Charge Level: The device switches to “Ground Adjustment” section after it detects the search coil. At the bottom of

11 Adjustment of SENSITIVITY Level: “SETUP” button is pressed for adjusting the level of sound of the device in whatever mode is it in

12 WHAT IS GROUND SETTING AND HOW IT IS DONE? In our country land formation and soil composition vary in relation to regions. In some regions the c

13 HOW GROUND SETTING IS MADE? When the device is switched on it starts with the “GROUND ADJUST” mode. Ground adjustment should be done befor

14 6. If there is no ground effect on the device there is no interaction on the bar that is indicated in the figure an

15 PERFORMING SEARCH WITH LCD SYSTEM  After “GROUND” setting is completed “ACCEPT” button is pressed and switched to Explore Mode.  H

16  If the target is valuable metal, there is a raise both on the “METAL” and ”VALUABLE” that is expressed in % depending on the magnitude o

17 READING THE OSCILLOSCOPE Oscilloscope draws plan view of an underground target. It helps us to pre-understanding the shape, quantity and depth of

18 9- Target is a cavity and deeper underground; 10- Target is a metal inside of a cavity; 11- If the oscilloscope line draws a straigh

1 INDEX Accessories and Components ... 4 Electronic System Unit ...

19 Getting and Analysis report by Analyzing the Target: To get an analysis report by analyzing the detected target during exploration:  P

20  Enter the “Width” value by using “+” and “-“ keys. Press the “ACCEPT” button after entering the width value and convert the frame

21 TECHNICAL PROPERTIES General Search Coil Deep Search Coil (Optional) Dimensions (mm) 360 x 440 600 x 1000 Frequency 12.5 kHz (VLF) Used Mode LCD

22 ACCESSORIES Condura Plastic totebag for the whole hardware. Headphones Double zippered Condura plastic carriage bag reinforced for deep search

2 WARNING! PLEASE DO NOT START ASSEMBLING OR USING BEFORE READING THE WARNINGS SECTION!

3 WARNINGS! 1. Since the device is electronic and very sensitive; never assemble and operate before reading the user

4 ACCESSORIES AND COMPONENTS 1. Electronic System Box and Case: It is the part where the detector sockets, headphone socket joystick f

5 5. Batteries: 14.8 V, 4 Ampere Lithium Polymer rechargeable batteries. Battery Operating Voltage (Min): 12 V Battery Operating Voltage (Max): 14.8

6 ELECTRONIC SYSTEM UNIT 1. GROUND: The key that allows switching to Ground Setting mode in LCD system mode. 2. SETUP: The key that al

7 ASSEMBLY AND CHARGING THE BATTERY 1. CHARGING THE BATTERY: Remove the battery from the system box and connect to the charger. When battery

8 SEARCH COIL CONNECTION Transmits the data received from search coil to the Electronic system box. The 5 pin “A” plugs shown in the above figure a